• June 18, 2024
How To Fix Apple TV Remote Not Working

How to fix Apple TV remote not working is the question that is everyone searching on Google. The most common causes of an Apple TV remote not working are either a connection issue or a battery issue.

The remote’s battery can be too low or dead. There might be another problem keeping it from connecting to the Apple TV.

In this article, I am going to discuss how to fix Apple TV remotes when it is not working and share some simple solutions to get them back in action.

How To Fix Apple TV When Remote Is Not Working

If your Apple TV remote is not working fine, it’s a common problem that can be readily fixed, so don’t panic. Here are some simple steps you can take to fix your Apple remote and get back to enjoying your favorite shows.

#1. Make sure your Apple TV can be controlled by your iPhone.

You should be able to operate your Apple TV from your iPhone by using the Apple TV app if it’s working properly.

To operate your Apple TV, you can alternatively use a universal remote or TV that is compatible. Your Apple TV might be experiencing a hardware issue if it doesn’t respond.

#2. Restart the Apple TV

After at least six seconds of unplugging your Apple TV, plug it back in. The Apple TV will restart as a result of this.

You can test the remote’s functionality after the Apple TV has finished rebooting.

#3. Check the battery level of your Remote

Examining the batteries is an important step to fix Apple TV remote not working. Your remote may not operate properly if the batteries are low on power or dead.

Here is the method to check the battery level of your remote.

  • Open the “Settings app” on your Apple TV’s home screen.
  • Select “Remote and Devices”.
  • Then, click on the “Remote”.
  • This screen’s “Battery Level” option indicates the precise charge percentage.

#4. Restart your Remote To fix Apple TV remote not working

Restart your Remote To Fix Apple TV Remote Not Working

You might attempt restarting your Apple TV or Siri Remote if it is silver or black in color.

  • Press and hold the “TV/Control Center” button.
  • Then, tap on the “Volume Down” for at least five seconds.
  • Then release the buttons, and wait for a “Connection Lost” message to appear on your TV.
  • After restarting, if you get a “Connected” signal on your TV, the remote should function properly once more.

#5. Pair the Remote

You can try pairing it manually if your Apple TV remote or Siri remote does not reconnect automatically. Here is how:

  1. Hold the remote about three inches from the Apple TV, then press and hold “back/menu + up” for at least five seconds.

2. If prompted, place the “Remote on top of your Apple TV” to complete the pairing process.

#6. Replace the Remote

Should you be able to operate your Apple TV using a third-party remote or your iPhone, but not the Apple TV remote, there might be a hardware issue with the remote.

For additional help, get in touch with Apple, or get a compatible remote instead of the old one.

How To Fix Spectrum Error Code ACF-9000 On Apple TV

How to Charge an Apple TV Remote

The silver Apple TV Remote and the black Siri Remote that were originally included with the Apple TV 4K are both chargeable.

Both of them require a lightning wire to be charged, and you can use the same cable that comes with your Apple TV or any other Apple product.

How to Replace the Apple TV Remote’s Battery

Rather than having built-in rechargeable batteries, older Apple TV remotes need replaceable batteries.

You can change the battery in your white Apple Remote or aluminum Apple Remote if it has only three buttons: play/pause, menu, and circle.

#1. White Apple Remote

Changing the battery in a white Apple Remote can be done as follows:

  1. Find the “small hole” located on the remote’s bottom, then place a paperclip inside.
  2. Use the “Paperclip” to press in until the battery tray comes out.
  3. Remove the “battery” from the tray.
  4. Insert a new “CR2032” battery into the tray.
  5. Push the tray back into place.

#2. Aluminum Apple Remote

Changing the battery in an aluminum Apple Remote can be done as follows:

  1. Find the remote’s “slot on the back”.
  2. A “coin” should fit into the remote’s back slot.
  3. The battery cover will pop off when you turn the “coin anticlockwise.”
  4. Remote the “battery”.
  5. Insert a new “CR2032” or “BR2032” battery.
  6. Place the cover over the battery.
  7. Twist the cover clockwise with a “coin” until it latches in place.

Conclusion

Experiencing issues with your Apple TV remote can be frustrating, but there are several steps you can take to fix Apple TV remote not working.

By understanding what may cause the remote to stop working and following the troubleshooting tips mentioned above, you should be able to get your Apple TV remote back up and running in no time.

Remember to first check for any physical obstructions or interference that may be affecting the signal between the remote and the Apple TV.

If that doesn’t solve the issue, try resetting your Apple TV or unpairing and re-pairing the remote. Additionally, make sure that your remote is fully charged or replace its battery if necessary.

Jack William is a freelancer, editor, and author. He has written for technology, Apple TV, Software, and gaming magazines. He is a Senior Editor at activemarketingfunnel.com and has been writing for the site since 2021. The current role involves editorial oversight, how-to's, and contributing reviews. Up to now, Jack has published articles on activemarketingfunnel.com, creating a complete solution system for various Apple TV, Tech, iPhone, and Android issues. Before joining the Editor team, he had over 10 years of working experience in the field of software and technology. Jack William has a Master's degree in computer science and engineering.

Leave a Reply

Your email address will not be published. Required fields are marked *